Skip to product information
1 of 4

KangerTech EVOD Clear Cartomizer

Regular price
$9.95 AUD
Regular price
Sale price
$9.95 AUD

Colour

KangerTech EVOD Clear Cartomizer

The Stainless Mouthpiece, Glass Tank, Dual Coil Unit, and Threaded Connector are the four components.

 Installed is a 1.8ohm coil unit.

 To refill the cartomizer, follow these steps:

  • Fill the cartomizer body with no more than 1.5ml e-liquid by turning it upside down.
  • Screw on the base connector with care (coil unit loaded) and drain any excess liquid.
  • Wait for the e-juice to feed into the coil for 1-2 minutes before you start vaping. Or To make the cartomizer go quicker, give it a little shake.
  • Attach your battery and begin vaping.
How do you take your BCC cartomizer out of the battery?

When separating the clear cartomizer from the battery, hold the bottom of the clear cartomizer. How do you take your BCC cartomizer out of the battery?

When separating the clear cartomizer from the battery MOD, hold the bottom of the clear cartomizer. Please do not screw the cartomizer from the top or middle, as this may cause the e-liquid to spill.

What is the procedure for replacing the coil unit/coil head?

Turn the cartomizer upside down, then unscrew the bottom base. Remove the old coil unit and replace it with a new one from the bottom base. So simple!

 Useful Hints:

  • Ensure that the cartomizer is securely fastened to the eGo/eGo-T/eGo-C/eGo-C Twist battery.
  • Make sure the coil unit is securely fitted into the cartomizer. If you're having trouble getting enough vapour, turn the transparent cartomizer upside down to allow the e-liquid to reach the fibre wick and coil on the top of the cartomizer.
  • If the cartomizer malfunctions or stops operating due to heavy use, simply replace the coil unit with a new one, and you'll have a whole new cartomizer!